Super PDR DIY Dent Removal Kit PDR Tool

-Application : 

1.Clean the dent with wet rag , and mark it with marking pen; 

2.Insert the glue stick into the glue gun and charge it by 3-5 minutes .

3.Select the proper tap to use according to the area of the dentand apply the hot melt adhesive on the tab evenly with the glue gun .

4.Quickly put the tab on the dent and press it until it is fastened on the dent .

5.Buckle the middle hole of the bridge with the rod of the tab after aimed at them, and put the nut on the connecting rod, and then spin the nut continually until repaired.

6 You should spin the nut and take the bridge and tab out after repaired, and spray the alcohol on the residual glue, and then clean it up with the scraper.

-Remark:

The Reflect board light board is for aligning the reflected lines of the board to a dent. The reflection becomes distorted where the dent is and you can work your PDR tool behind the dent to make the distorted image even or uniform again, once the distorted image or lines become parallel in the reflection you have successfully removed the DENT!

-Pakcing & Delivery : 

Hot Tags: super pdr diy dent removal kit pdr tool, suppliers China, manufacturers, factory, wholesale, buy, price, quotation