Packing list:
| 1*Host | 1*polishing | 1*Vibrator head |
| 1*Lens | 1*Signal line | 1*Pen suction cup |
| 1*manual | 1*Curing lamp | 1*Hair dryer |
| 1*Bracket | 2*power cable | Black box size:50*40*45CM |
Our glass repair products are mainly composed of the following products, mainly: host, heat guide flow, UV light, high -frequency guide flow machine, and polishing machine. Next I will briefly introduce the work principle of this product and demonstrate how to use this product. The working principle of this product is to drip the repair liquid into the glass cracks, stick it with a repair membrane, and then use a high -frequency guide flower to better penetrate the repair solution into the crack
HOW to use the advanced car glass repaire machine
1. Use the camera, observe the cracks, analyze the crack conditions, and select suitable tools.
2. Clean the crack. If there is water or it is drizzled over the rain, dry first and make protection measures, stick a little paper towel, then stick it with a rainproof membrane to protect it, and then repair it after 2-3 days.
3. Drop the repair liquid and stick the membrane
4. Press the position of the original rupture of the cracks with a pressed pen. You can press the bottom. According to the situation, appropriately increase the strength
5. Open the glass repair instrument, click the high -frequency guide flow instrument to the upper above the crack (appropriately increase the repair liquid), keep it until the end, you can add a little repair solution in the middle of the way.
6. Drop 2 drops of repair liquid and stick it above the cracks
7. Observe the cracks, use heat diversion to align the back of the cracks, and not be too close to the wound
8. Observe the changes in the cracks. You can use the pressed pen to properly press the air to the place where the repair liquid is not penetrated.
9. Observe the cracks, choose the right tool, continue to operate until the air is completely discharged, and the repair solution is fully entered
10. Sử dụng camera để kiểm tra xem chất lỏng sửa chữa vết nứt đã thấm đều chưa. Nếu đã thấm đều, bạn có thể bật đèn UV, để chất lỏng khô trong 15 phút, sau đó dùng lưỡi dao cạo sạch chất lỏng sửa chữa. Nếu chưa thấm đều, tiếp tục thực hiện các thao tác trên cho đến khi chất lỏng thấm đều.
Hot Tags: SUPERPDR Intelligent Automobile Glass Repair System, suppliers China, manufacturers, factory, wholesale, buy, price, quotation
