Technical guides for repair professionals and B2B buyers, from tool selection and inspection to procurement, quality control, and after-sales support.
How to Read a PDR Line Board: Reflection Patterns, Low Spots, High Spots, and Finishing Control
A PDR line board reveals changes in the reflected pattern, not a direct depth measurement. Establish a stable view of sound and damaged metal, compare the local distortion, then cross-check from another angle before choosing or continuing a...
+
자세히 보기
PDR Tool Selection Guide: Rods, Hooks, Glue Pullers, Slide Hammers, Lifters, and Line Boards
A tool-selection guide mapping rods, hooks, glue pullers, slide hammers, lifters, knockdowns, and line boards to access route, dent shape, and buyer type.
+
자세히 보기
What Dents Can Be Repaired With PDR? A Repairability Matrix for Technicians and Buyers
A repairability matrix that explains which dents are suitable for PDR, which conditions create risk, and which Super PDR tool path fits each repair route.
+
자세히 보기
PDR Glue Pulling Troubleshooting: Why Tabs Do Not Stick and How to Control Pull Strength
Inspect paint and repair suitability first. Diagnose where the bond released, then check cleaning, adhesive instructions, tab contact and pull alignment one variable at a time. Re-read the reflection after each correction rather than increasing force to compensate...
+
자세히 보기
프로페셔널 PDR 스타터 세트를 구축하는 방법: 도구 역할, 액세스 로직 및 업그레이드 경로
This article explains how to build a practical PDR starter set by evaluating tool roles, access logic, coverage, upgrade planning, and procurement consistency.
+
자세히 보기
PDR의 접착제 풀링: 탭 선택, 접착제 제어 및 안전한 힘 해제
This article explains how tab size, adhesive control, pulling strategy, and safe release affect repeatability, surface safety, and finishing workload in glue pulling workflows.
+
자세히 보기
